Online | Blogging | Curation

This content shows Simple View

How to Create a DIY Gutter Protections Brisbane

It’s a proven fact that nobody cares about what happens to their gutter system until something does happen to it. While they may just be hanging around the edges of your house, you should keep in mind that your gutter system is just as important as your entire roof. That’s why you need to protect it with a gutter protection Brisbane system, such as a gutter guard. There are different kinds of gutter guards available in the market right now. If you want, you can also make your own gutter guard by yourself. That’s right – we’re talking about DIY. With that said, here’s a simple guide on how you can make a DIY gutter protection Brisbane system and not have to spend some money on it:

 

Here’s A List Of What You’ll Need

 

  • Tape Measure
  • Drills
  • Calculator
  • Hacksaw
  • Box of penny nails
  • Rust-preventing spray paint.
  • A box of washers
  • Notepad
  • Hammer
  • Metal Snips
  • Wire mesh
  • Ladder
  • Box of small self-drilling screws

 

Once you manage to gather all of the items on your list, it’s time to make your very own DIY gutter protection Brisbane system – Also known as the gutter guard. You’ll need all of the items listed above for this project. So as much as possible, avoid any compromises.

 

 

Making Your Gutter Guard

Now that you have everything, you can now start making your DIY gutter protection system. Follow the steps below and make sure you don’t skip a beat.

 

  • Using a hacksaw, cut the roll of mesh into half. Doing so will create two (2) rolls that are four (4) inches wide.
  • Spray paint the mesh with a rust-prevention spray or paint to provide enhanced protection from rust or oxidation. The mesh won’t really need it since it will either be galvanised or made of aluminium. But you can still do this process just to make sure.
  • Unless you have someone to help, you unroll it as you work around your home, cut the rolls of mesh into even shorter lengths to make them much easier to manage while you go through each side of your house.
  • Use penny nails and washers to secure the mesh to the roof of your house entirely. Use an electric drill and self-drilling screws to attach the other edge to the outer edge of your gutter system. Place the nails and screws approximately every 18 inches to make sure that it stays tightly secured in place.
  • When you encounter gutter stiffeners, use a self-drilling screw to attach the mesh to the stiffener to add some strength.
  • When you meet the end of a roll, overlap the pieces by one to two inches to make sure that no leaves or any other debris are able to get into your gutters.

 

Congratulations! You managed to complete your DIY gutter protection Brisbane system. Now you can achieve complete peace of mind knowing that your gutters are 100 per cent safe from potential congestions and damages. For more home DIY projects just like this one, visit our blog page today.

 





top